(Moneta, VA)  CCG is presently providing comprehensive stormwater management design and a water quality plan for a 47-acre mixed-use development along Smith Mountain Lake. Performed in association with ACS Design.

(Moneta, VA)  CCG prepared grading plan and stormwater management / water quality improvement design for a 3-acre retail center near Smith Mountain Lake. Performed in association with ACS Design.

(Botetourt County, VA)  In 2007, CCG was awarded an on-call contract with the County of Botetourt.

(Roanoke County, VA)  CCG was awarded an on-call contract for civil engineering and design services by Roanoke County. Work for this contract is forthcoming.

(Roanoke, VA)  Staff member served as Lead Engineer for 1-acre site development including planning, grading, parking layout, stormwater conveyance, sanitary sewer, water, and underground stormwater detention. The underground stormwater detention facility was unique in Roanoke because it did not have a gravity outfall. The stormwater was pumped from the facility at a rate equal to the predeveloped flow rate. Follow-up visits have shown the underground stormwater management facility to be functioning perfectly.

(Buena Vista, VA)  CCG was responsible for the complete design of an underground stormwater detention system and water quality improvement structures to serve a new townhome development. The original plan proposed an unworkable facility and Civil Consulting Group completely altered the approach to bring the project into regulatory compliance.

(Chantilly, VA)  Staff member served as Lead Engineer for hydrologic analysis and design of a regional stormwater management pond for several parcels within a 110-acre industrial drainage shed. The facility was designed for water quality improvement as well as stormwater detention. Project included a dam breech analysis.

(Staunton, VA)  Staff member served as Lead Engineer for hydrologic study of 640-acre urban area comprised of 30+ subsheds, all of which were modeled using TR-55 and TR-20 methods. The data was used to design several thousand feet of large scale storm drain piping and box culverts along a busy urban collector roadway.

(Roanoke County, VA)  Staff member served as Lead Engineer for hydrologic analysis and stormwater management pond design for a 100-acre industrial park. The pond was designed to over-detain stormwater runoff due to an inadequate offsite culvert that could not be replaced. Uncommon design elements included a sediment forebay, and grading to protect wetlands.

(Fairfax County, VA)  Staff member served as Lead Engineer for hydrologic analysis and design of regional stormwater management pond for 650-acre drainage shed. This facility was designed immediately upstream of an existing roadway containing two 60 inch raw water transmission mains. Two existing 72 inch culverts were present within the roadway embankment and two more were added. Two public meetings were held with adjacent residents to educate them about the project’s importance and recreational trails were designed adjacent to the facility.